NO.

Installation Instructions

1

Preassembly with bolts as shown in the picture on the right. The bolts do not need to be completely tightened and the bottom cover does not need to be installed.

2

Determine the fixing hole position of the handrail on the step, and drill holes with φ10mm drill bit. Each handrail column needs to be drilled 4 mounting holes.

3

Insert four expansion bolts through the holes in the column mounting plate and use a hammer to strike the holes drilled into the ground.

4

Tighten the nut on the expansion bolt with a wrench until tightened.

5

Secure the bolts on the handrail.

6

At the bottom of the column, install a decorative cover. Install end cover at the end of top tube.Then the assembly work is done.